The HP 2530 Switch Series consists of four fully managed Layer 2 edge switches, delivering cost-effective, reliable and secure connectivity for business networks.

Features
Quality of Service (QoS)

Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)

Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port and priority level. VLAN-based: prioritizes traffic by specifying a VLAN and priority level.

Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

Rate limiting: sets per-port ingress enforced maximums for all ingressed traffic or for broadcast, multicast, or unknown destination traffic

Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers

Management

Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.

Virtual stacking: provides single IP address management of up to 16 switches

sFlow (RFC 3176): delivers wire-speed traffic accounting and monitoring configured by SNMP and CLI with three terminal encrypted receivers

IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automates device discovery protocol for easy mapping by network management applications

Logging: provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated

Connectivity

IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.

IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras

IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/tilt/zoom security cameras (see product specifications for total PoE power available)

Auto-MDIX: adjusts automatically for straight-through or crossover cables on all ports

Pre-standard PoE support: detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.hp.com/networking/support

Layer 2 switching

VLANs: provides support for 512 VLANs and 4,094 VLAN IDs

Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers. The 8 and 24 port Fast Ethernet models automatically support up to 2000-byte frames with no configuration needed.

16K MAC address table: provides access to many Layer 2 devices

GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs


Ports

48 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+)<br>Media Type: Auto-MDIX<br>Duplex: half or full
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)<br>Duplex: 10BASE-T/100BASE-TX: half or full
1000BASE-T: full only
2 fixed Gigabit Ethernet SFP ports
1 dual-personality (RJ-45 or USB micro-B) serial console port

Memory and processor
Processor : ARM9E @ 800 MHz, 128 MB flash, packet buffer size: 3 MB dynamically allocated, 256 MB DDR3 DIMM

Latency

100 Mb Latency: < 6.6 µs (LIFO 64-byte packets)
1000 Mb Latency: < 2.2 µs (LIFO 64-byte packets)

Throughput
up to 13 million pps (64-byte packets)

Management features

IMC - Intelligent Management Center
command-line interface
Web browser
configuration menu
out-of-band management (serial RS-232C or Micro USB)
IEEE 802.3 Ethernet MIB
Repeater MIB
Ethernet Interface MIB

Switching capacity
17.6 Gbps

PoE capability

382 W

Power and operating requirements
Power and operating requirements

Power consumption
441 W (maximum), 37.5 W (standby)

Input voltage
100-127/200-240 VAC

Operating temperature range
0 to 45?C

Operating humidity range
15 to 95% @ 104?F (40?C) (noncondensing)

Heat dissipation
170 BTU/hr (179.35 kJ/hr)

Dimensions and weight
Dimensions and weight

Minimum dimensions (W x D x H)
44.2 x 32.26 x 4.45 cm

Weight
4.58 kg

What's included
What's included

What's in the box

(1) HP 2530-48-PoE+ Switch

Warranty
Lifetime, advance replacement, next business day, phone support, software releases