Hp 2530-8 Switch J9783a

$421.00
SKU: 193789
MPN: J9783A
Manufacturer: http://www8.hp.com/au/en/home.html
Brand: Hp
Availability:

Preorder 2-3 weeks

Fright Estimate

The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Limited Lifetime Warranty 2.0 with 3 years 24x7 phone support.

The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Features
Cost-Effective, Reliable and Secure Access Layer Switches
The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments.
Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Limited Lifetime Warranty 2.0 with 3 years 24x7 phone support.
Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks.
Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
Limited Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.
Security and Quality of Service
The HP 2530 Switch Series supports flexible authentication methods including Local MAC Authentication, 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication.
Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS.
Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Defend your IPv6 network with DHCPv6 Protection.
Simple Deployment and Management
The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports.
Quiet operation with fanless and variable speed fan models.
Flexible deployment with wall, table, and rack mounting options.
TR-069 delivers zero touch deployment for devices with dynamic IP addresses and on private networks.
Single View of the Network
The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
Differentiator
The HP 2530-8 Switch is a fully managed layer 2 switch with 8 10/100 ports and 2 dual personality ports.
Ports
8 RJ-45 autosensing 10/100 ports
2 dual-personality ports
Included
Memory and processor
ARM9E @ 800 MHz
128 MB flash
packet buffer size: 1.5 MB dynamically allocated
256 MB DDR3 DIMM
Latency
100 Mb Latency: < 1.3 µs
1000 Mb Latency: < 1.3 µs
Throughput
up to 4.1 Mpps
Switching capacity
5.6 Gbps
Stacking capabilities
Virtual
16 switches
Management features
IMC - Intelligent Management Center
command-line interface
Web browser
configuration menu
out-of-band management (serial RS-232C or Micro USB)
IEEE 802.3 Ethernet MIB
Repeater MIB
Ethernet Interface MIB
Dimensions and weight
Minimum dimensions (W x D x H)
25.4 x 15.95 x 4.45 cm
Weight
0.82 kg
What's included
What's in the box
(1) HP 2530-8 Switch
Warranty
Limited Lifetime warranty: Advance hardware replacement with next-business-day delivery (available in most countries). See www.hp.com/networking/warrantysummary for duration details.;Electronic and telephone support: limited electronic and telephone support is available from HP refer to www.hp.com/networking/support for details on the support provided and the period during which support is available;Software releases: refer to www.hp.com/networking/support for details on the software releases provided and the period during which software releases are available for your product(s)

Marketing TextThe HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches that deliver cost-effective, reliable, secure, and easy-to-use connectivity to business networks.
PI DateNov 2013
Brand NameHP
Manufacturer Web Sitehttp://www.hp.com
Form Factor1U
Product Model2530-8
Product TypeSwitch
Mac Address16kentries
Forwarding Rate4.1Mpps
Latency1.3µs
Packet Buffer1.5MB
Switching Fabric5.6Gbps
Jumbo Frame Size9220Bytes
Expansion Ports2 x Dual Personality
Fast Ethernet PortYes
Gigabit Ethernet PortYes
No. of Ports8
Type10/100
Other Port 1 x Console Port
Virtual LAN* VLAN-based
prioritize traffic by specifying a VLAN and priority level
* GARP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
Management Features* IMC - Intelligent Management Center
* command-line interface
* Web browser
* configuration menu
* out-of-band management (serial RS-232C or Micro USB)
* IEEE 802.3 Ethernet MIB
* Repeater MIB
* Ethernet Interface MIB
Security Features* Access control lists (ACLs)
accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is
supported only on Gigabit Ethernet and 48-port models)
* Source-port filtering
allows only specified ports to communicate with each other
* RADIUS/TACACS+
eases switch management security administration by using a
password authentication server
* Secure Sockets Layer (SSL)
encrypts all HTTP traffic, allowing secure access to the
browser-based management GUI in the switch
Standards* IEEE 802.1D MAC Bridges
* IEEE 802.1p Priority
* IEEE 802.1Q VLANs
* IEEE 802.1s Multiple Spanning Trees
Quality of Service (QoS)* Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
* Simplified QoS configuration: Port-based: prioritizes traffic by specifying a port and priority level. VLAN-based: prioritizes traffic by specifying a VLAN and priority level.
* Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ
Output Power7.2Watt
Depth (mm)159.5
Height (mm)44.5
Width (mm)254.0
Weight (Kg)0.8
Layer Support2
ManagementManaged
RAM Installed256MB
Flash Memory128MB
Network Technology10/100
Other Features* 8 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX)Media Type: Auto-MDIXDuplex: half or full
* 2 dual-personality portseach port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T
* IEEE 802.3u Type 100Base-Tx
* IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with SFP transceivers) ports
* 1 dual-personality (RJ-45 or USB micro-B) serial console port